Weekend Projects – Bass Bump Headphone Amp

This post was written by Scott
Posted Under: Bass Lessons Videos
Complete instructions for this episode of Weekend Projects can be found at http://makezine.com/projects/bass-bump-headphone-amp/ Use dual LM386 amplifiers to…

Reader Comments

Ridiculous! You need to match the pots, i’m lefting now

#1 
Written By All Eletronics on April 11th, 2014 @ 7:58 am

*Bass Bump Headphone Amp*

The Bass Bump Headphone Amp is an audio accessory you can build to improve
all of your private music listening. It has enough power to give clear
sound and punchy dynamics through most any pair of headphones, or even a
set of small speakers.

*Read more :* http://lc.cx/iAT

#2 
Written By Omar Loisel on April 11th, 2014 @ 8:28 am

Who the hell would carry that about?!

#3 
Written By Callum Burns on April 11th, 2014 @ 8:38 am

Why wouldnt you use a dual wiper pot? So that way you can control both
channels with one knob and know they both have exactly the same settings.
I guess its because “it’s not available at Radioshack”

#4 
Written By Justin DiPlacido on April 11th, 2014 @ 9:33 am

TDA2822m would have been a better choice for a headphone amp

#5 
Written By TheNiggiboy on April 11th, 2014 @ 9:33 am

can u use this for a car stereo ?

#6 
Written By harigovind gopakumar on April 11th, 2014 @ 9:46 am

This looks like a mono amp?

#7 
Written By Edward Phillips on April 11th, 2014 @ 10:30 am

Can I use a 12V adapter with this amplifier?

#8 
Written By Diego Vela on April 11th, 2014 @ 10:45 am

Super project! What’s the music used in this video?

#9 
Written By VitekSTZero on April 11th, 2014 @ 11:41 am

its better for a subwoofer i think!

#10 
Written By MaxR pyro on April 11th, 2014 @ 12:37 pm

LM386 = Not too good choice on this. Noisy as hell. It works if you need
loud, but not if you need clear with loud. 

#11 
Written By Mike Bates on April 11th, 2014 @ 12:44 pm

too many resistors

#12 
Written By John Naw Naw on April 11th, 2014 @ 1:18 pm

Is there a way to use One pot to change the bass instead of having to match
up two?

#13 
Written By Mike Sutton on April 11th, 2014 @ 2:12 pm

Lol, I like how he’s adding bass boost to one of the best pairs of
headphones out there (Sony MDR-7506′s) that do a decent job anyway :P 

#14 
Written By Cole Nave on April 11th, 2014 @ 2:23 pm

what size project box did you use?

#15 
Written By Tucker Tisdale on April 11th, 2014 @ 3:15 pm

how long you been working on this video?

#16 
Written By VisulX Production on April 11th, 2014 @ 4:14 pm

Why not just make a cmoy amp?

#17 
Written By russ25052 on April 11th, 2014 @ 4:33 pm

Weekend Projects – Bass Bump Headphone Amp http://ow.ly/2B1WqA

#18 
Written By beastachu's youtube subscriptions on April 11th, 2014 @ 5:17 pm
#19 
Written By Aitor Rodríguez on April 11th, 2014 @ 5:48 pm

Weekend Projects – Bass Bump Headphone Amp

#20 
Written By Romano Woodfolk on April 11th, 2014 @ 6:34 pm

I like the effort put into making the graphics in the video very
explanatory.

#21 
Written By oj43085 on April 11th, 2014 @ 6:51 pm

I’ve never used one of those, but I DID take a capacitor out of a stereo
system and touched it to my tongue. It was the size of my fist at the time,
and it tasted like blue. It was possibly the 6th dumbest thing I have ever
done with electronics.

#22 
Written By Ronwe TheFallen on April 11th, 2014 @ 7:03 pm

What about the usage of other batteries? Also I’d like to see a video for
the mint tin being used as a solar charger for multiple devices. Thank you.

#23 
Written By darkbiss on April 11th, 2014 @ 7:31 pm

Wow…a project without the overkill of an Arduino! I can actually give
this video a like!

#24 
Written By Chris Brown on April 11th, 2014 @ 8:17 pm

Unexplained……..

#25 
Written By HackerDude on April 11th, 2014 @ 9:00 pm

Add a Comment

required, use real name
required, will not be published
optional, your blog address